Product No. 3096 Everlast Silicone

Description

DESCRIPTION: PRODUCT NO. 3096 FOREVER-COAT is a 100% silicone, RTV moisture cure, waterproof roof coating which forms a monolithic barrier to the effects of degradation caused by normal weathering, aging and ultraviolet exposure. PRODUCT NO. 3096 FOREVER-COAT has excellent durability, color stability and chalk resistance. It is typically used as a protective coating for polyurethane foam or metal and new or existing roofs.

USES: PRODUCT NO. 3096 FOREVER-COAT can be directly applied over most previously coated roof surfaces as well as exposed spray polyurethane foam, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION: All surfaces to be coated should be free of dirt, dust, chalking paint, mortar spatter, all loose rust, all loose mill scale, old caulking, grease, oil, release agents, curing compounds, laitance and other foreign matter including frost. Surfaces should be power washed with appropriate detergent and rinsed prior to coating. On asphalt based substrates, one coat of Everlast Coatings PRODUCT NO. 650 Stain Blocking Primer is highly recommended to prevent discoloring. Roof surfaces need to be clean and dry. A 20 mil thickness will skin over in about 60 minutes and have sufficient strength to walk on for application of a second coat in about 4 to 6 hours.

APPLICATION: Mixing: PRODUCT NO. 3096 FOREVER-COAT is supplied as a one-part coating (no component mixing necessary). Mix by an air powered agitator (300 – 400 rpm) for a minimum of 5 minutes, to ensure an even consistency of coating is obtained without air in suspension. Application: The temperature of the surface to be coated should be between 41 and 120°F (5 and 60°C) and environmental temperature should be at least 5°F (3°C) above the dew point prior to and during application. When working with PRODUCT NO. 3096 FOREVER-COAT in high humidity and/or high temperature environments, it is recommended to use a pail lid adapter fitted with an agitator. This will prevent the product from skinning over and curing in the pail during application. It is recommended that : PRODUCT NO. 3096 FOREVER-COAT be applied using an airless sprayer; however, brush, squeegee or roller are also suitable methods of application. It is necessary to apply at a rate that will achieve a minimum of 20 mils (508 μm)

STORAGE: Shelf Life: 12 months from date of manufacture in the original unopened container below 90°F (32°C). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition. May be stored below freezing.

CLEAN-UP: Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with Si-COAT equipment cleaner, naphtha or mineral spirits.